A line down mid-shift, a service that cannot carry the new machine, exit signs the inspector just failed, or a kitchen circuit dropping every dinner rush. Our ECRA/ESA licensed electricians work around your production and trading hours, and quote the fix in writing before anything starts.
Six areas that cover most of what Thorold plants, warehouses and businesses actually call us for — handled by ECRA/ESA licensed electricians and scheduled around your shifts.
Load assessment before anyone signs for new equipment, then service upgrades, sub-panels, feeder resizing and voltage drop corrected. Undersized feeders are the quiet reason a machine trips out weeks after it was installed.
MCC work, starters, contactors, overloads and VFD faults, plus wiring for new or relocated machines. We trace the fault to its source rather than replacing components until the line happens to run again.
Panels built and wired, or vendor-supplied panels integrated into your existing controls. Everything labelled and handed over with drawings, so your maintenance team is not reverse-engineering someone else's work at 2 AM.
Dedicated circuits for kitchen equipment, walk-in coolers, compressors, HVAC and POS terminals. Sharing a circuit works right up until the dinner rush, when the one that drops takes the till with it.
High-bay LED over racking, sales floor retrofits done after closing, plus exit signs and emergency lighting brought up to code before a fire or licensing inspection — including whatever the last tenant left behind.
A tripped main, a dead circuit during trading hours or a line stopped mid-shift. Where a safe temporary fix gets production moving, we do that first and return to complete the permanent repair.
Closing the doors or stopping a line costs more than the electrical work itself. Our commercial and industrial electricians in Thorold plan the window first and work back from your reopening time, not ours.
Electrical work scoped before the window opens
Materials on site, circuits identified and the sequence agreed in advance, so shutdown hours go into the work instead of into figuring it out.
Staged isolation instead of a full shutdown
One section de-energised at a time so the rest of the floor keeps running, with temporary feeds where a cooler or a production line cannot lose power at all.
Evening, overnight and weekend electricians
Retail and restaurant electrical services scheduled after closing, plant work around shift changes and shutdown weekends. Your trading hours stay yours.
Licensed electricians who meet your site rules
ECRA/ESA licensed and insured, with induction, lockout-tagout, permits and PPE handled as your health and safety team expects, plus certificates of insurance for landlords who ask before access.
Tested and documented before you reopen
Circuits proven, panels labelled, drawings updated and the ESA notification filed — nothing outstanding when the next shift or the first customer walks in.
Every operation has its own pressure point — the circuit that drops at the worst hour, or the service that cannot take one more machine. These are the sites our commercial and industrial electricians work in most often.
Plants & Production Lines
Three-phase power, motor control, machine wiring and breakdown call-outs.
Warehouses & Logistics
High-bay LED over racking, dock power and conveyor circuits.
Machine & Fabrication Shops
CNC hookups, welder circuits, compressors and added capacity.
Restaurants & Cafés
Kitchen equipment circuits, walk-in coolers, hoods and patio lighting.
Retail, Offices & Clinics
Fit-outs, POS and data power, lighting retrofits, surge protection.
Rental Units & Property Managers
Turnover repairs, code corrections between tenants, common area lighting.
Downtime, capacity, code compliance and paperwork — what owners, plant managers and property managers ask before booking commercial or industrial electrical services.
Yes, and for most shops and restaurants that is how we schedule it. Our commercial electricians work evenings, overnight and weekends, and larger jobs are staged section by section so only part of the floor is isolated at a time. Temporary feeds keep a cooler or a till running where the circuit cannot go down at all. Closing for a day almost always costs more than the electrical work itself.
Breakdown call-outs go to the front of the schedule, because every hour of downtime costs you. Our industrial electricians trace the actual fault instead of swapping parts on a guess, whether it sits in the motor control centre, a contactor, an overload, a drive or a feeder with voltage drop. Where a safe temporary arrangement gets the line moving, we do that first and return to complete the permanent repair.
Yes, and it should happen before anything is ordered. We run a load assessment on the existing three-phase service and distribution, which shows whether new machines or kitchen equipment run off the current supply, whether a feeder or panel needs upsizing, or whether a full service upgrade is required. Skipping that step is the usual reason a new install starts tripping a few weeks in.
Three-phase power and service upgrades, distribution and feeder work, motor control, VFDs and machine wiring, control panels, disconnects and conduit, dedicated circuits for kitchen equipment, coolers and HVAC, high-bay and LED lighting retrofits, emergency lighting and exit signs, tenant fit-outs and office power, plus breakdown call-outs. We cover offices, retail units, restaurants, warehouses, machine shops and plants across Thorold.
Yes. Emergency lighting and exit signs, panel labelling, GFCI protection in kitchens and washrooms, and circuits a previous tenant altered without paperwork. Everything is completed to the Ontario Electrical Safety Code, the ESA notification is filed by us, and you receive the documentation your landlord, insurer or licensing inspector will ask for.
Every electrician on site is ECRA/ESA licensed and fully insured, and we provide certificates of insurance for landlords and property managers who require them before access. On industrial sites we complete your induction and follow lockout-tagout procedures, permits and PPE requirements the way your health and safety team expects.
Tell us what is happening — a breaker that will not stay on, a panel with no room left, or a quote you need before a renovation. A licensed electrician calls you back to confirm a time.
Send the form. Name, phone and email is enough to get started.
We call you back to confirm the booking and a realistic time window.
You get a written price before any work begins — labour, materials and the ESA fee included.
Something urgent?
Calling is faster than the form.
Thank You!
Your message has been sent successfully. We'll get back to you shortly.
Shops, restaurants, warehouses and plants that needed service upgrades, machine circuits, lighting retrofits or a breakdown call-out handled without losing a day.
A drive on the main conveyor failed mid-shift and we were dead in the water. The industrial electrician was on site within the hour, isolated the fault to a burnt contactor in the MCC, and had the line running before the next shift started. That one call-out paid for itself several times over.
Our walk-in cooler kept dropping during dinner service and took the till with it twice. I searched for a commercial electrician near me and they came the same evening. Traced it to a shared circuit, added dedicated lines for the cooler and the fryer, and we have not lost a service since.
We brought in two new CNC machines and needed three-phase power extended with proper disconnects. The load assessment came first, which two other contractors skipped entirely. Conduit runs are tidy, the panel is labelled, and it passed ESA inspection without a single correction.
Entire warehouse switched from metal halide to high-bay LED, done on nights and weekends around a lift so picking never stopped. The light level at floor and rack height is a different building now, and the hydro bill dropped the first month.
We manage three multi-unit buildings and needed emergency lighting and exit signs brought up to code before inspection. Everything tested, documented and signed off with ESA, and they sent certificates of insurance before the crew ever showed up. One contact for all three properties made it simple.
Compressor kept dropping out and two previous contractors just replaced parts. I looked up industrial electrical services near me and these guys actually traced it to voltage drop on an undersized feeder. Rewired correctly and it has not tripped once since.
Fit-out of an empty retail unit from shell to opening day. Desk and POS power, lighting, panel work and the ESA paperwork all coordinated with our landlord and the other trades. We opened on the date we had advertised, which honestly surprised me.
Our service could not carry another machine, so the upgrade was planned around a shutdown weekend. New distribution, upgraded feeders and room left for the next one. Back up and cutting Monday morning exactly as promised.
Residential, commercial and industrial electrical services throughout Thorold and the surrounding Niagara communities — from Downtown and Port Robinson out to Allanburg and Beaverdams.
Our Location
3550 Schmon Pkwy Unit #9
Thorold, ON L2V 0C4
